■2BE3液環真空泵概述

        2BE3 series water-ring vacuum pump and compressor are high-efficiency energy-saving products developed by our company based on many years of scientific research and production experience and combined with advanced technology of similar products in the world. they are usually used to pump gas that does not contain solid particles, is insoluble in water and is non-corrosive, so as to form vacuum and pressure in closed containers.  Liquid ring vacuum pump can also be used to pump corrosive gas or use corrosive liquid as working fluid by changing structural materials and adding anti-corrosive coating.  It is very suitable for long-term and continuous operation.

　　■ The supplying range of pumps can be flexibly chosen according to customers’ requirements.

Pump head: including the upper-type separator, connecting pipe.

Whole set of the machine: including the pump head, the upper-type separator, connecting pipe, motor, base, hood, pump and motor connector or pump pulley, belt.

Vacuum pump unit: including vacuum pump machine, gas-water separator, check valve, bellows and connected piping, electrical contact vacuum gauge, auto-decompression starting cabinet.

Complete sets of equipment: including the whole set of vacuum pump machine, gas-water separator (with level gauge), heat exchangers, valves, normally closed valves, filters, vacuum gauge, pressure gauge, pipe, electric control cabinet.

Inlet pressure below 33 mbar (absolute), 2 stages or multi-stages vacuum system (water ring - Roots unit) will be in use.

● Varied transmission methods, such as: coupler drive, pulley drive, reducer drive.

● Stainless steel materials (304, 316L) or special ones can be provided according to the corrosion of media; Packing seals and mechanical seals or others can be provided on request.